ClickCease

This is an animated dialog which is useful for displaying information. The dialog window can be moved, resized and closed with the 'x' icon.

This is an animated dialog which is useful for displaying information. The dialog window can be moved, resized and closed with the 'x' icon.

This is an animated dialog which is useful for displaying information. The dialog window can be moved, resized and closed with the 'x' icon.

This is an animated dialog which is useful for displaying information. The dialog window can be moved, resized and closed with the 'x' icon.

Deutsch English Francais Pусский Español 中国的

NOCH KEIN KUNDE?
REGISTRIEREN!

Als Rohmaterial- und Maschinenkunde von Seal Maker genießen Sie zusätzliche Vorteile.
Registrieren Sie sich jetzt und nutzen Sie die Service-Leistungen im Customer-Center von Seal Maker!

Welcome!

01.12.2021 - SML System Software Update 4.12.13

A new Update of our SML System Software 4 is ready for release. The update includes following improvements:

  • New global variables & production parameters
  • Profile optimization
  • New tool and profil added


The new update 4.12.13 can be downloaded in the customer area of our website.

24.08.2021 - Seals Technology 02/21

Find some interesting topics in our latest SEALS Technology issue 02/21

17.08.2021 - REACH-UPDATE

NEW document regarding REACH

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs). The candidate list now contains 219 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area in the section "certificates".

13.04.2021 - Seals Technology 01/21

Find some interesting topics in our latest SEALS Technology issue 01/21

02.03.2020 - SML System Software Update 4.11.12

A new Update of our SML System Software 4 is ready for release. The update includes following improvements:

  • Face Drill Mill - Flange drilling
  • New global variables
  • Profile optimization
  • New tool selection-naming


The new update 4.11.12 can be downloaded in the customer area of our website.

05.02.2021 - REACH-UPDATE

NEW document regarding REACH

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs). The candidate list now contains 211 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area in the section "certificates".

30.12.2020 Up-to-date data sheets

As we always strive to provide our customers with the most up-to-date data sheets, formal adjustments have been made and incorporated.

All PTFE material data sheets have been updated

 

The data sheets can be found in the login area or in the product overview of plastic materials for download.

15.12.2020 - Seals Technology 03/20

Find some interesting topics in our latest SEALS Technology issue 03/20

01.12.2020 - NEW Special Industry Marine

We have extended our portfolio with a new brochure on the subject “Special Industry Marine”. It includes comprehensive and detailed information about marine sealing solutions.


The brochure can be downloaded here.

08.09.2020 - SML System Software Update 4.10.11

A new Update of our SML System Software 4 is ready for release. The update includes following improvements:

  • New profiles FL04/FL05
  • Center Drill
  • New tools
  • New Global Variables & Production Parameters
  • Profile optimization and adjustments of individual profiles
  • New tool selection-naming
  • Shifted Holder


The new update 4.10.11 can be downloaded in the customer area of our website.

10.07.2020 - REACH-UPDATE

NEW document regarding REACH

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs). The candidate list now contains 209 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area in the section "certificates".

19.05.2020 - PRODUCTION under RECONSTRUCTION

In order to meet the increasing demand for large and welded seals, our in-house CNC production at the Pöttelsdorf site underwent a renovation at the beginning of this year. The main focus was on expanding the machine equipment with a new SML 1800e. In addition, a new seal welding station was created. All shelves, workplaces and SML machines were disassembled and various renovations were carried out. Cable channels were laid, new workplaces organized, and meanwhile, eight CNC complete machine systems have been rearranged.

Easier processing, greater reliability and better delivery service are the advantages that result from the renovation works. Apart from increasing our capacities in CNC manufacturing, we can now react even more flexibly and quickly to customer requests.

Watch the process: Follow our renovation works step by step in our time-lapse video!

Renovation works time-lapse video

30.04.2020 - Adaption of Elastomer Compounds

Adaption of Elastomer Compounds


NBR95
For reasons of better processing our material N109-B95 has been slightly adapted. Elastomer base, cross linking system, as well as fillers of the raw rubber compound have remained unchanged. Only the filler dosage has slightly been modified. Consequently, the material data sheet will also be adapted; the high material quality, however, will certainly be ensured further on. Batches from June 2020 will be processed using the adapted compound.


EPDM KTW

Furthermore, a new EPDM-material will be introduced. The new material E134-B85 (EPDM-KTW-W270) will be available from mid of May and will replace the material E133-B85. The new elastomer compound has been developed in close accordance to the current elastomer guideline of the German Federal Environment Agency. It has been successfully tested to microbial growth and certified according to the standard W270 for applications in drinking water. Furthermore, the new material is characterized by better mechanical properties and offers additional approvals for food contact. The material currently complies with the approvals W270, FDA and EU1935 / 2004.

For any questions please do not hesitate to contact us at sales@seal-maker.com

23.01.2020 - REACH Update

NEW document regarding REACH

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs). The candidate list now contains 205 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area in the section "certificates".

07.01.2020 - INCOTERMS® 2020

Keeping up-to-date with new and revised international standards and regulations we would like to inform you that the Incoterms 2020 have been released by the ICC - International Chamber of Commerce and will be applied from beginning of February this year.

All shipments from 1st February onwards will be subject to the Incoterms 2020 regulations. We shall apply the updated equivalent Incoterm based on past orders and shipments of our customers.

Although the main guidelines of the updated version remain basically the same, some slight changes might occur. In case you have any questions or need some further information please do not hesitate to contact us or refer to the following webpage for more information: https://iccwbo.org/resources-for-business/incoterms-rules/incoterms-2020/

26.11.2019 - SML System Software Update 4.9.10

A new Update of our SML System Software 4 is ready for release. The update includes following improvements:

  • Individual setting of the raw material dimensions
  • Activation of the piece counter
  • Individual allocation of roughing tool numbers
  • Individual setting possibility for the cutting off - procedure
  • Profile optimization and adjustments of individual profiles
  • New generation and design adjustment of profile data sheets


The new update 4.9.10 can be downloaded in the customer area of our website.

04.11.2019 - ISO certificate

ISO certification

We are proud to announce that all requirements according to ISO9001:2015 have been extended for additional three years. A big thank to all colleagues for their commitment in the course of the audit by TÜV AUSTRIA. Please download our certificate here.

#SealMaker #MadeInAustria #qualityassurance #iso

10.10.2019 - 5 million pieces of seals

Seal Maker - 5mio seals

5 million pieces of seals

The in-house CNC department at Seal Maker headquarters manufactures a wide variety of seals for  customers who are not able do it themselves due to capacity, complexity or dimension reasons. Today we reached the 5 mio mark in selling seals since 1997. We thank all our customers for their cooperation and their trust.

#SealMaker #LetsSealTheWorld

31.07.2019 - NEW: REACH document

NEW document regarding REACH

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs). The candidate list now contains 201 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area in the section "certificates".

22.07.2019 Cracking sales levels

Seal Maker proudly announces new levels in total sales since the launch of the company in 1997. By mid-July Seal Maker cracked its figures for the total amount of semi-finished products sold.

Total number of Semi-finished products: > 4 million pcs.

18.07.2019 Seal Maker Webshop

As Seal Maker is steadily striving to make daily business for our partners easier and to provide the latest technology, we are proud to offer delivery via our WEBSHOP. Please click here for further informations and registration.

 

 

27.05.2019 Software Update V4.8.9.

The SML System Software has been further improved and a new update is now available. Please find more details in the login area of our website.

 

 

16.04.2019 NEW SEALS TECHNOLOGY 1/19

Find some interesting topics in our latest SEALS Technology issue 1/19

09.04.2019 Announcement: NEW SML750eplus Complete CNC-System

Seal Maker is pleased to announce our latest member of Seal Maker’s CNC-System family: the new extended limits SML 750eplus.

Please find further informations and details here

23.01.2019 - NEW: REACH

NEW document regarding REACH

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs). The candidate list now contains 197 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area in the section "certificates".

05.12.2018 Software Update V4.7.8

The SML System Software has been further improved and a new update is now available. Please find more details in the login area of our website.

 

 

30.11.2018 Up-to-date data sheets

As we always strive to provide our customers with the most up-to-date data sheets, formal adjustments have been made and incorporated.

Furthermore, U500-R95 red has been tested in other food simulants according to Commisson Regulation (EU) No. 10/2011 and can therefore be used in an even wider range of food applications.

The new certificate as well as the updated data sheets can be found in the login area for download.

 

 

06.08.2018 - Gap size calculation

When developing customized and application-specific solutions, Seal Maker always strives to provide you with comprehensive services. As of now, a new gap size calculation tool is available in the customer area at www.seal-maker.com which you can use online at any time. 

The tool can be used to determine the maximum radial sealing gap for different types of seals in a hydraulic system by entering pressure, temperature and diameter. Depending on the choice of materials - elastomers, polyurethanes or even a combination of both types of material with support ring - different sizes result for the maximum sealing gap. 

The program can thus be used for re-designing cylinders, but also serves as an aid in the selection of seals in existing hydraulic systems. 

 

 

03.08.2018 - Seal Maker goes mobile

Did you know that the Seal Maker website can now be properly used also on all mobile devices? We have optimized our website for you and have changed all pages to responsive web design. No matter which device you want to surf the site with, the responsive design gives you optimal usability on any mobile device. Get your phone or tablet right now and test it. 

19.07.2018 - Update Data Sheets

​We always want to keep our customers up to date and therefore our data sheets are being adjusted constantly. Formal adjustments were made to the material datasheets and, in addition, some mechanical data were slightly adjusted. Furthermore all safety data sheets have been updated.


The latest version of the documents is available in the login area for download.

16.07.2018 - New: SML System Software 4.6.7 available

The SML System Software has been further improved and a new update is now available. Please find more details in the login area of our website.

03.07.2018 - NEW: REACH and SVHC

NEW documents regarding REACH and SVHC

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs). The candidate list now contains 191 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area in the section "certificates".

15.01.2018 - NEW: REACH and SVHC

NEW documents regarding REACH and SVHC

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs). The candidate list now contains 181 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area in the section "certificates".

Details on the new substances can be found at:
https://echa.europa.eu/-/seven-new-substances-added-to-the-candidate-list-entry-for-bisphenol-a-updated-to-reflect-its-endocrine-disrupting-properties-for-the-environment

05.12.2017 New: SML System Software 4.5.6 available

The SML System Software has been further improved and a new update is now available. Please find more details in the login area of our website.

16.11.2017 - Update Material Data Sheets

We always want to keep our customers up to date and therefore our material data sheets are being adjusted constantly. All elastomers have been tested according to ISO 34-1B/b (tear-growth resistance) and some approved for food applications according to EU 1935/2004.

The latest version of the documents is available for download here.

 

 

13.09.2017 - NEW: Seals Technology 02/2017

The journey of a Seal Maker machine - our latest edition of Seals Technology is online!

More information HERE

 

 

31.07.2017 - NEW: REACH and SVHC

NEW documents regarding REACH and SVHC

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs). The candidate list now contains 174 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area in the section "certificates".

Details on the four new substances can be found at:
https://echa.europa.eu/-/one-new-substance-added-to-the-candidate-list

26.06.2017 New: SML System Software 4.4.5 available

The SML System Software has been further improved and a new update is now available in Basic and Professional version. Please find more details in the login area as well as on our website.

06.06.2017 - Data base for material resistance

As of now, the Seal Maker service will be expanded with a further tool. A database in which the media resistance of sealing materials can be queried is available in the customer area of our website. In addition to the usual search criteria of the medium itself, there is also the possibility to search for chemical formulas or for the CAS number, the international standard naming for chemicals. The database will be constantly expanded and supplemented with data. However, our specialists are always at your disposal for detailed questions.

The database for material resistance can be found here

03.05.2017 - PU solid bars without clamping ring

In the course of further process optimization, polyurethane solid bars, i.e. billets without inner diameter, will be delivered without a clamping ring in the future. After a successful test phase in our production, no disadvantages in the machining could be determined with the usual clamping of the billets. Billets with production date from 2 May 2017 onwards will be manufactured accordingly longer. Thus, the same useful length of the material itself can be guaranteed and therefore it is ensured that there are no financial disadvantages in the use of the material. Please also refer to our extended tolerance sheet for billets in the customer portal (section data sheets).

 

 

24.04.2017 - Polyurethane U505

Intensive research and development work ensures that customers are always kept up to date with technology. With U505-P79, Seal Maker presents the first polyurethane material under 80 shore, which provides pleasing surface results even with standard machining parameters. The material combines the positive properties of elastomers with the positive properties of polyurethanes and is characterized by high flexibility with regard to possible application areas. As the material 505 is a member of the Polyurethane-family it offers the typical advantages like excellent mechanical properties, outstanding abrasion and chemical resistance, as well as excellent sealing properties in the low-pressure range. Irregularities of the housing / the counter-surface can also be perfectly balanced with this innovative material. There are almost no diameter limits when the new PU505 is used for the preloading element (instead of NBR).

More information can be found here and in our download area.

 

 

18.04.2017 - NEW: Seals Technology 01/2017

U505-P79 - our latest edition of Seals Technology is online!

More information HERE

 

 

06.03.2017 - Latest products and services

What happened lately?
Seal Maker provides an information sheet including all latest products and services.
More information here.

19.01.2017 - NEW: REACH and SVHC

NEW documents regarding REACH and SVHC

ECHA, the european chemicals agency, has expanded the Candidate List of substances of very high concern (SVHCs) by 4 substances. The candidate list now contains 173 substances and therefore we have extended and updated our confirmations.

Please find our updated documents in the customer area.

Details on the four new substances can be found at:
https://echa.europa.eu/-/four-new-substances-of-very-high-concern-added-to-the-candidate-list

12.01.2017 - Upgrade Elastomers

NBR-FDA N111:
A new, improved material batch has to be used in order to receive for the NBR N111 also the approval for food application in line with EU1935/2004, in addition to the already certified FDA approval.
Due to this batch change and some additional optimizations in the production process the conformity of the material NBR-FDA N111 with both the European approval EU1935/2004 as well as with FDA can be confirmed.

EPDM E133-W270:
The approval of the KTW composition expired end of 2016.
So far the requirements of the KTW recommendations part 1.3.13 “Rubber materials of natural and synthetic caoutchouc” (plastics in potable water) were valid, which was basically a list of raw materials and rubber batches listed as harmless, and the according test procedures.

In the meantime the German federal office for environment has withdrawn this recommendation, and has replaced it by the guidelines for the sanitary rating of elastomers in contact with potable water.
This guideline for elastomers, which was developed by the federal office for environment in co-operation with the KTW-AG in line with the EU guideline 2013/471/D, is divided into several categories.
On the one hand all components of the elastomer batch must be contained in the positive listing of this guideline, which can be confirmed for the EPDM-E133.
On the other hand also the positively passed test for micro-bacterial growth in accordance with the guideline (DIN16421, resp. W270) for E133 can be confirmed.
Eventually the end user, the plant operator, might require materials with a “certified approval”. This requires additional migration tests of the end product, the ready machined seal, in line with the guideline for elastomers.

To date EPDM-E133 holds the following positive test results:
* all ingredients of the batch are contained in the positive listing of the guidelines
* valid test certificate in line with DVGW worksheet W270 – microbacterial growth according to DIN16421 (W270)

02.01.2017 - Special Industry Solutions.2017

Experience and expertise are required when it comes to specific industries such as hydropower, mining or the cement industry. To meet the growing requirements, Seal Maker presents targeted application solutions, which are reflected under the title "Special Industry Solutions" in the new poster series 2017. The expressive posters show the appropriate sealing solutions for every industrial field.

 

 

21.12.2016 - NEW: Seals Technology 03/2016

Special Industry Solutions - our latest edition of Seals Technology is online!

More information HERE

 

28.11.2016 - NEW: QR-Code Integration

From now on special QR codes can be found on all our material labels. The codes allow an easy and quick electronic capture of all printed information. QR-codes are more compact compared to normal bar codes and allow efficient capture of data with simple devices such as hand scanner or mobile app.

The QR codes include the following information:

  • item number
  • dimension
  • batch number

25.10.2016 - ISO Certificate

In October, a 2-day audit was carried out by TÜV-Süd at Seal Maker – once again, the findings were positive. For the first time Seal Maker has been certified according to the new Standard revision ISO 9001:2015. The new edition features some important changes: The targeted definition with all stakeholders at the company, the increased focus on the risk management as well as the importance of knowledge management are substantial components of the new standard.

Seal Maker is proud to fulfill once again all the conditions in accordance to all applicable management system requirements.

04.07.2016 - Upgrade for RGD-materials

For several years Seal Maker offers RGD certified raw materials (Rapid-Gas-Decompression - or ED - explosive decompression). Now the range of raw materials has been enhanced by U520-OR95-HT, so this PU raw material is now approved for RGD applications. Furthermore F800 has been improved, too. The whole manufacturing process for this RGD raw material has totally been reworked and optimized. By doing so the production could be made more flexible and the minimum quantity could be reduced tremendously.  In order to guarantee prompt delivery the raw material will be on stock up to ø200mm. Due to new production process of F800, it was necessary to adjust the pricing.


Material data sheets, RGD-certificates as well as the pricelist are available now – please find more information here.

RGD raw materials:


H-NBR RGD: HN900-B85-RGD
H-NBR RGD LT: HN901-B85-RGD
FPM RGD: F800-B85-RGD

PU520 orange: U520-OR95-HT

01.06.2016 - SML System Software 4 Basic vs. Professional

Our SML System Software has been further improved. From now on the SML System Software 4 Basic replaces SML System Software 3.5 and will be made available to all machine clients automatically. Furthermore the Basic version can easily be upgraded to the level of the new professional version. Please find more details in the login area as well as on our website.

 

 

06.04.2016 - Update Certificates

New certificates are available and ready for download in the login area!

  • Declaration 3A sanitary standard E132-W85
  • Declaration 3A sanitary standard F110-BR85
  • Declaration 3A sanitary standard N111-W85
  • Declaration 3A sanitary standard S102-R85

More information HERE

 

 

 

01.04.2016 - NEW: Seals Technology 01/2016

Sealing Highlights - our latest edition of Seals Technology is online!

More information HERE

 

 

 

12.02.2016 - Update Elastomers datasheets

Update - all Elastomers datasheets are updated and available for download!

Elastomers datasheets

 

 

22.01.2016 - SML1800e - READY FOR DISPATCH

Seal Maker shipping SML1800e

The last preparations for the first shipment of our "lathe giant" SML1800e have finally moved into top gear. The machine is leaving Seal Maker today for a long journey to the USA.

14.01.2016 - Blown away by AirBlast

Seal Maker - Air Blast

Ready for AirBlast? Our new Option for CNC machines AirBlast allows the removal of swarf by means of compressed air blasts directed at the tool top. This guarantees a more efficient manufacturing. The AirBlast Option is available for all SMLe machines. AirBlast is included in SML500e machines with the BLS120 Option, as well as in the SML1000e and SML1800e machines. The option can further be retrofitted to all other machine versions. For more information please contact our export managers » sales(at)seal-maker.com

For more information click HERE.

 

 

22.12.2015 - Se(a)lective Taste. 2016

The year 2015 was highly influenced by innovation and developments, both in terms of our SML machines, materials as well as our software. Even the design of our new poster-set 2016 with the slogan "Se(a)lective Taste" is quite innovative - Bon Appétit!

Poster Set 2016

11.11.2015 - Innovation Award Burgenland 2015

Yesterday, on the 10th of November 2015 in the evening, the most innovative companies in Burgenland have been awarded in the Culture and Convention Centre in Eisenstadt.  The Innovation Award of Burgenland shows, which creative and market-oriented services and products regional companies offer to the country and to the world. We are pleased that Seal Maker was awarded in the category small and medium-sized enterprises.

Click here to go to the press reports:

Gute Idee Burgenland

Booklet Innovation Award 2015

ORF Report

02.11.2015 - U5XX: Optimized quality for the same price

Hard materials like U570-D57 as well as U580-D57-G have been equipped with clamping rings too. So from November onwards the entire U5XX range will be available with clamping rings. The advantages are obvious: even safer and more accurate clamping in the machine, minimized risk for ovality especially for thin-walled semi-finished products and clearly defined usable lengths make the use in lathe machines a lot easier.

08.10.2015 - Johann Glocknitzer is „Manager of the year 2015”

Johann Glocknitzer_Manager des Jahres_2015

Yesterday, 7th of October 2015 in the evening, the annual "Manager of the Year" award ceremony was held in the regional studios of the Austrian Broadcasting Corporation ORF. We are pleased to inform you that Johann Glocknitzer was honored as the 19th "Manager of the Year", awarded by the Management Club Burgenland. On behalf of all employees we sincerely congratulate.

Click here to go to the press reports:

ORF report

ORF video

BVZ report

19.09.2015 - Advanced Seals - Wendy House

Packing cases are not always for waste – a perfect example is the "Wendy House" in New Zealand. The plywood packing of a new machine was used to build a playhouse for children. Get inspired by "Wendy House" HERE.

27.08.2015 -Relaunch - Brochures Product Portfolio

Seal Maker product portfolio in new style - get inspired by our new brochures HERE.

11.08.2015 - FANUC announces successful cooperation with Seal Maker

Please find some more information about our business cooperation with FANUC HERE.

23.07.2015 - We renew our machinery!

Seal Maker production machineries are available for sale now.
Please find some more detailed information about our machines HERE.

13.07.2015 - SML Software 4.0 is now available!

The new SML Software 4.0 has intensively been tested for several months: besides numerous advantages it also offers some new features. In the update version more than 200 profiles in standard and special design are put at your disposal. Besides many new profiles various optimizations and process improvements could be integrated. Sealing in any dimension as well as automatically generated tool lists and 3D-simulations provide maximum flexibility and efficiency. Moreover direct mail delivery of documents, statistics or easily editable drawings guarantee maximum user friendliness. We are always striving to develop an optimal product for effective work with the Seal Maker software. Therefore we are always eager receive constructive suggestions from your side.

Please find more detailed information about our new SML Software HERE.

15.05.2015 - Seal Maker lights up the world

Seal Maker is happy to announce the registration of more than 200 locations with Seal Maker machines worldwide.


Each new spot is highlighted on our worldmap by luminous points. We would like to thank all customers, partners and employees for their cooperation and confidence.

30.04.2015 - The new PU500 Family

Polyurethane U203 vs. U500It is not always easy to question what has been approved and verified and is functioning well, and to explore new paths. Nevertheless, new developments and progress are indispensable if we want to achieve the best possible results. Seal Maker will soon offer an entire well-established product family based on U500. Be it the maximum temperature of 135°C, a minimum temperature of down to -55°C, friction optimization, a higher degree of hardness, a lower degree of hardness, better chemical resistance or the application in food processing, U5xx covers all areas and will also replace our U203 from July 2015 as the new standard raw material.

But finally, we do not want to leave everything behind that has been approved and verified. Especially the U203-G95 (PU – green) will become important in the future, particularly in the price-sensitive market segment. U203-G95 will still be available from our stock and can be offered at a cheaper price than before due to appropriate production process optimizations. The other raw materials of the U203 family will also continue to be available upon request.

Please find more detailed information about our new PU5XX HERE.

28.04.2015 - Seal Maker at MDA Hannover 2015!

More than 220,000 trade visitors used MDA Hannover in April 2015 to catch up on the latest technologies and make key investment decisions.  Seal Maker was close to the action and presented their products and features at a more than 100 sqm booth.

The participation in the major international industrial tradeshow is every time a highlight. Especially the direct contact with customers and prospects is essential in terms of gaining information on current trends and wishes.

We would like to thank all our customers and partners for visiting our booth and sincerely look forward to interesting discussions, fruitful collaborations and positive feedback on our latest developments.

Please find some more information about MDA Hannover 2015 here.

09.04.2015 - NEW: BLS120

BLS120

Seal Maker's new “billet loading system” makes it possible to feed standard billets with a length between 120 and 170mm, and a diameter between 20 and 120mm into the machine and clamp it automatically in the chuck, so that the machine operator does not need to continuously feed the billets manually. This billet loading system has been designed highly flexible, so that the change to another billet dimension requires only a minimum period of time.

The new billet loading system is available for new SML 500e machines at once.

Watch the video showing the new bar loading system here

07.04.2015 - Visit us at MDA Hannover, stand E39, hall 20

With some quite intensive preparation work being done, it is our pleasure to present to you Seal Maker's latest developments just in time for HANNOVER MESSE 2015:

+ BLS120 – the new billet loading system
+ PU500 Family – the new materials
+ New: SML System Software 4.0
+ New: Integrated Measuring System for SML- machines
+ and more..

Read more about this in our latest edition of  SEALS TECHNOLOGY or get convinced „live“ at our booth E39 in hall 20 at HANNOVER MESSE 2015 from 13th till 17th April. We look forward to your visit!

22.01.2015 - In compliance with your requirements

Certificates

In almost every industry, requirements and demands regarding certificates and credentials of various kinds are increasing. This may apply to products that have to be approved for a specific intended use, to enable traceability of supplied products or serve to allow a company to stand out from the competition. Repeatedly customers ask for testing certificates regarding our products.

In the following article, we would like to provide you with more information as to all the certificates and similar measures that we at Seal Maker can help you with.

Download article

05.11.2014 - New SML Software-Update 3.5.13 now available!

A new SML Systemsoftware-Update has been released on 05.11.2014
The new version has been upgraded from 199 to 202 profiles, several improvements have been implemented. For any further information please contact our service department
sml-service(at)seal-maker.com

06.10.2014 - Award for "Face the world of seals"

Seal Maker Poster-Set

Seal Maker proudly announces that they have been awarded by the Austrian province Burgenland for the design of the poster series “Face the world of seals”. This is the advertising motto of a poster series designed by Seal Maker's sister company “Logorhythmus”, which shall highlight Seal Maker's “internationality and inter-cultural competence”. We made use of the services of the current body painting world champion - a top professional - to paint the faces. Take a deep glance at the overall effect: aesthetic, emotional and mysterious!

You can apply for the poster series 2014 “Face the world of seals” free of charge at marketing(at)seal-maker.com

Find a survey of all Seal Maker posters here

09.09.2014 - New SML500e for Durban

new seal maker for durban

BMG - Bearing Man Group - has invested in its second Seal Maker SML500e machine, each of which has the capability to produce over 180 standardised hydraulic and pneumatic seals, o-rings, back up seals and oil seals, to exact specifications. The new SML machine has been installed at BMG's Durban Sydny Road branch. Read more about this online or download article.

11.08.2014 - Material benefits: new coating moulds!

We were able to considerably improve quality with the production of new and additional coating moulds for semi-finished products with an outer diameter of 20 mm to 730 mm. On the one hand, the coating’s material quality was improved, but above all, optimisation of the coating mould itself resulted in an increased useful length of the semi-finished product.

30.06.2014 - Seal Maker is "Hidden Champion 3.0"

Seal Maker - Hidden Champion 3.0

In the course of this year's export day, organized by the Austrian Chamber of Commerce on Tuesday, 24th of June, 2014, the Chamber's President Dr. Christoph Leitl honored the companies moving ahead Austria's upswing with their international engagement. Seal Maker, too, is among the most successful export oriented companies in Austria, and was rewarded the so-called “Hidden Champion 3.0”.

24.04.2014 - Automatic clamping system for SML500e

SML_automation

Seal Maker has carried out intensive work over the past few weeks with regards to the completion of a new product, a new option for our SML500e "all-rounder". After a certain market trend towards small batch production was identified, Seal Maker developed a system in which seals can be produced even more efficiently and cost-effectively.

Seal Maker believed that a system should be created for flexible seal production and especially for the processing of plastics which would satisfy requirements by being simpler to handle and having shorter set-up times. Based on the innovative SML500e, which is a basis machine designed for plastic processing, the results can be seen quite clearly: an option for the "automation of the manual clamping chuck", a simple and technically advanced system, both cost-efficient as a new purchase and also suitable as a retrofit for all existing SML500e machines. 

For more information about the new option klick here!

03.03.2014 - More than 100 produced SMLe machines!

100 produced SMLe machines

On the 3rd of March 2014, at exactly 10:29, the 100th SMLe from in-house production was shipped with the serial number 14SML0100. We are particularly pleased that this machine was delivered to a renowned seal manufacturer, which proves that the quality of our products also fulfi ls our customer’s requirements and meets the demands of a global corporation.

In total, including all machines that were manufactured or adapted before the introduction of the SMLe-series, Seal Maker registered 260 installed machines worldwide. We would like to thank all customers, partners and employees for their cooperation and trust!

15.02.2014 - Individual & flexible SML500eplus!

SML500eplus

The new Option Plus offers you the possibility of processing sealing profi les individually by using milling tools, or also expanding your product portfolio towards “engineered plastic products”. The big advantage: The already working machines SML500e can get upgraded to the PLUS version with driven tools by installing a retrofi t kit. During the development of this retrofi t kit, we took special care in fi nding a technically useful and reasonably priced solution, but without any restrictions on machining.

Expand your possibilities with a reasonably priced upgrade of your existing machine, or use the chance to purchase a new seal production system with full production options!

HOT NEWS

around Seal City

01.12.2021

Software Update 4.12.13

24.08.2021

Seals Technology 02/21

17.08.2021

REACh Update